Unpacking, assembly and setup process for Assembly Model.
Assembly Model Video Transcript:
Hello again, my name is Benjamin. This is the 42-inch meditation pyramid. It solves the problem of international shipping. This will ship anywhere worldwide. It will come in this box here and we’ll do a little presentation of how it unpacks.
You can see there is a bag of four screws, the top and the bottom. In bubble wrap you’ll want to be careful not to cut any of these wires when you remove the bubble wrap. Okay, bubble wrap has been removed. As you can see the top is set up to swing off this key ring and there are four dowels that will need to be inserted into the top of the base. Here and then four screws apply to hold the dowels in place.
The next step, as you can see, is to lay out the four pipes that represent the base. Make sure there’s no tangles. As you can see, they’re set up as if it was the base of the pyramid. And then you find yourself a Phillips head screwdriver.
You insert the bottom Ace onto the dowel and you can see the hole will line up with the screw and you’ll see a starter hole in the dowel and you just set that in place.
Take your pack of screws and tighten the screw.
That’s in place. You make sure you grab the next one and you insert it.
Line up the holes, apply the screw and work your way around until you’re finished. There it is, the finished product.
You can see the amount of space I have above my head.
They’re in whatever form of lotus position you like.
Or at six feet, I fit entirely in the pyramid. Straight up and down.
I have the option to fold my legs and scoot closer to the center.
And now that the screws are applied and it’s fully assembled like the others, they’ll fold up and stow away in the closet. [No speech recorded] There you have it, the 42-inch meditation pyramid.